Hexa's Blog

K1 max & Nozzle 0.6mm

16/11/2024 @ Saigon 3D Print

This profile is tested with Creality Ender PLA filament. I only note which is the most important settings.

  • Nozzle: 0.6mm
  • Maximum volumetric speed: 30mm3/s
  • Layer height: 0.3mm
  • Nozzle temperature: 220C
  • Flow ratio: 1
  • Pressure Advance: 0.02
  • First layer:
    • outer wall speed: 50m/s
    • first infill speed: 105mm/s
  • Other layer:
    • outer speed: 105mm/s
    • inner speed: 125mm/s
    • Top surface speed: 105mm/s
[1] Speed settings
[1] Speed settings
  • Retraction
    • Length: 0.5mm
    • Z hop when retract: 0.2mm
    • Z hop type: spiral
    • Retraction speed: 40mm/s
[2] Retraction settings
[2] Retraction settings